Standard Bed Cost List

Digital Kit – $199

Generic Steel you will need purchase from a local steel dealer* – ~$600-$750 Download the Steel List.

Lights/Wiring/Decking – ~$500

Finish (Powercoat/Paint)* – $35 – $650

Total Cost: $1284 – $1899

*Prices are subject to local supplier and serve as an estimate only.

Optional Add-Ons

Underbody Tool Boxes: ~$500

Fender Kit: $199-$229

Our Kits are unconventional in that we don’t send you everything, only the machine made parts that you can’t purchase locally. Why? Because it would be what’s known as a rip-off to charge you for mark up and exorbitant amounts of shipping cost to sell you generic steel that you can buy locally without a middle man. That being said, you’ll be responsible in purchasing the generic steel to make the process as affordable as possible. Download the free material list so you can get an exact cost for everything you’ll need. We’ll still send you the machine made parts and provide you with the blueprints to make the build seamless.

This kit gives you everything you need to seamlessly complete the base model bed. It is designed to be a cheap alternative to pre-made flatbeds.

We sell two different kit options: standard and digital. Standard Kits include the CNC machine made parts shipped to your door and a model specific blueprint that lays out all of the other steel you need to purchase locally and at what lengths and angles to cut it. The digital kit is for those who own or have access to a CNC table or laser and includes the .dxf cut files for all the machine made parts in addition to a model specific blueprint. This kit is designed to be used in combination with the video tutorial.

Experince Needed

Moderate to advanced welding experience is needed to complete this project as well as experience using all shop tools described below.

Tools and Equipment Needed

1. Ear Plugs
2. Safety Glasses
3. Welding Helmet
4. Welding Gloves
5. Welding Coat or protective outer layer
6. Welder – needs to adequately weld 3/16” thick plate
7. Bandsaw – capable of handling 2.5” square tube (most all small bandsaws)
8. Angle Grinder
9. Tape Measure
10. Vice grips OR C-clamps – 6 total
11. Square
12. Drill Press OR Hand Drill
13. (2) 7/32” Drill Bit
14. ¾” Drill bit (only if installing marker lights)
15. Type 27 Flapper disk grinding wheel(s)
16. Slitter disk(s) OR Plasma Cutter
17. Metal Pencil or Sharpie Marker
18. Forklift OR Shop Crane OR 4 Strong people (for installation)

An experienced fabricator can build this project in 30 hours and install in 8 – 10 hours.

Gooseneck Ball

Our Kits are designed to fit with your existing frame mounted gooseneck ball. If you don’t currently have one installed, you will need to add a frame mounted gooseneck ball. 

Bumper Pull Hitch

Our kits fit seamlessly with your factory bumper pull hitch. Why? Because it’s far supererior to have your hitch tied directly to your frame and the enginereed from the the factory setup.